CORNER GRAZER/ FREE STANDING

A once a day feeder! Use anywhere. stall, paddock or pasture… Drain plug for easy clean up or when soaking hay. Holds 6 average size flakes which lasts most horses 24 hours.

See description below for choosing hole size

$319.00

Clear
SKU: CFPG-2 pc Category:

Description

Porta-Grazer™ Corner Feeder 2 pc. set includes: barrel and one feed restrictor pan with the hole size of your choice (see below).  The patented interlocking tab system  allows the pan to be secured in the barrel while still partially extended above the barrel opening allowing for more hay.  For best results the hay is not fluffed, simply place the flake flat against the inside barrel wall, push down folding the flake over to the bottom -creating an arch-  then line up the keyhole in the pan with the handle and drop in the pan.  Takes only seconds to load!!  The barrel is designed to fit perfectly into corners.  Can easily be secured using an eye bolt and a tether of your choice.  Can also be free standing like all other Porta-Grazer models.  Built in trough to trap sand, mold and dirt away from your horse to be discarded at your convenience.

  Once a day is what you asked for and that is what you get!!!

Approximate hay capacity = 9972 cu. in. = Approximately 6 average size flakes.   Weight/Volume of hay will vary depending on the compaction, moisture content and how the hay is loaded.

Hole selection guideline- Read all choices before making selection.
3.5″ holes for- feeding grass hay free choice.
4″ holes for-  ration feeding all horses,  alfalfa hay, any hay that is overly compacted, dry, brittle or coarse, any hay taken from round or big square bales, and horses with under or over bites, or when soaking hay.  Draft horses

 

Specifications- Rugged food grade (not recycled) polyethylene plastic, UV protected, rated to 30 deg. below zero. approx. 33 lbs empty, 28″ tall x 23.5″ wide, 3/4″ threaded drain plug.

 

 

***CAUTION***Horses hooves must be 1” larger in diameter than the holes in the feed restrictor pan to avoid possible entrapment and injury. For ponies: If the hoof is not larger than the smallest available hole size then the hoof must be 1/2″ smaller than the selected hole size so the hoof may be easily removed.

 

Additional information

Hole Size

3.5" Hole Size, 4" Hole Size